Por total falta de espaco, coloco a venda estas Monitor Audio PL 200 na cor Ebony, pra mim a cor mais bonita, acabamento impecavel. Caixas completas com embalagens e ferramentas originais, caixas sem detalhes. Aceito books ou torres pequenas como parte de pagamento. Description: Three-way, reflex-loaded, floorstanding loudspeaker. Drive-units: 21/4" tall C-CAM (magnesium) ribbon tweeter, 4" RDT (metal-coated Nomex)-cone midrange driver, two 6.5" RDT-cone woofers. Crossover frequencies: 600Hz, 3.6kHz. Frequency range: 35Hz–100kHz. Sensitivity: 90dB/2.83V/m. Nominal impedance: 4 ohms. Maximum SPL (per pair in room): 117.8dB. Power handling: 250W. Recommended amplification: 100–250W. Dimensions: 39" (998mm) H by 10" (255mm) W by 111/4" (285mm) D (including fixed plinth). Weight (including plinth): 72.7 lbs (33kg). Frequency Response 35 Hz - 100 KHz Sensitivity (1W@1M) 90 dB Nominal Impedance 4 Ohms Maximum SPL 117.8 dBA Power Handling (RMS) 250 W Recommended Amplifier Requirements 100 - 250 W Bass Alignment Rear Ported HiVe®II technology Sealed Mid-range TLE® Mid / H.F Crossover Frequency 3600 Hz Bass Low Pass Crossover Frequency 600 Hz Drive Unit Complement 2 x 61/2 long-throw RDT® bass drivers 1 x 4" RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer External Dimensions (Including Plinth (H x W x D)) 998 x 360 x 375 mm (395/16 x 143/16 x 143/4 inches) Weight (each) 33Kg (72.7 lbs) Technology Single Ported HiVe II technology Sealed Mid-range TLE (Tapered Line Enclosure) 2 x 6 1/2” long-throw C-CAM (Ceramic-Coated Aluminium/Magnesium) bass drivers with RDT (Rigid Diaphragm Technology) 1 x 4” RDT mid-range driver 1 x C-CAM high frequency ribbon transducer ARC (Anti-Resonance Composite) baffles, plinths and mid-range driver housing All cabinet finishes have hand-upholstered front baffles in black Ingleston premium grade leather. Finish options: Santos Rosewood veneer with clear gloss piano lacquer, Ebony veneer with clear gloss piano lacquer, Piano black gloss.